Autonics Photoelectric Sensor, Photoelectric Type BJ100-DDT-P Stubby Magnetic Screwdriver ***2 Presets
Baker’s notes & crumb story
Description
***2 Presets
Specification item model symbol Specification information With auto switch D With auto switch installation support T center trunnion type tube material - aluminum tube tube inner diameter 63 Bore size 63mm Types of port screws - Rc cylinder stroke 150 Cylinder stroke 150mm Cylinder additional symbol - No bellows
This is a PUSH TYPE TENSIONER
The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC conforming to EN/IEC 60947-2 standard and 6000A at 230VAC conforming to EN/IEC 60898-1 standard
Autonics Photoelectric Sensor, Photoelectric Type BJ100-DDT-P Stubby Magnetic Screwdriver ***2 PresetsSensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12 24VDC 10%(ripple P P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by switch) Control output PNP open collector Connection type Cable type(3. 5, 2m) Environment_Ambient illumination Sunlight: Max.