6" Steel Hose Mender Inlet Threads_NH / NST communities have seen an increase

communities have seen an increase in stolen copper and brass

Type "F" brass 1 1/2 inch male camlock (Cam & Groove) coupler to 1 1/2 inch male NPT threads

Note: The most common 1 1/2 inch Mil Spec hose is coupled with NPSH threads

it does not perform as well as neoprene in applications requiring exposure to weather

6" Steel Hose Mender Inlet Threads_NH / NST communities have seen an increaseThe hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or